Owners converted car audio purposes? ", the answer is needed, with the wind, to show off. Similarly, when asked about the "owner why not adapted car audio", except that this is the "rich man's game", there is also an important answer is "car audio conversion prejudicial to the original car." What car audio lossless conversion? is there as some owners think of that undermining the original car? on this issue, I interviewed "national top ten car audio enterprise" Canton "Guangzhou sanecore brothers enterprise" General Manager Mr. Phan permanently.
"Discussion of this issue, we want to know what is lossy. "Pan permanently said," in audio conversion process, such as automobile door was torn out, instrument panel removal, installation, and after line disorder instead cause other functions can not be used, instead of sound is not working or noise, these are prejudicial to the performance. ”
It would appear that the discussion on car audio conversion is lossless, depends on these phenomena mentioned above will not be modified, or often doesn't often occur. "Yes," Pan permanent nodded to, "we know that in the entire conversion process, the vehicle doors is the effort, because most of the door panel is a snap-in installation mode, to hold, dial up, if not technician careless or professional, you likely broken buckle caused damage. This is a professional and experienced engineers, technicians, to revise this model if the car, know where a buckle, know which direction to force, to know how much force to balance out, you can avoid these phenomena is complete. While our technology three two under remove, elsewhere is basically the unloading screw, simpler. ”
This seems a little like we open red wine, if you haven't had red wine, you even can not find the bottle cap child, I do not know how long a Cork in it to open. You don't know what tools to use to open, even if you have the tools, you don't know how to use. Furthermore, the bottle opener into Cork, should also pay attention to the method, note the direction and intensity of the exertion. This wine can be lossless and open. This is the experience of professional not professional.
Put your own car dismantling Sevens often let owners heart pain, when the door opened, and you want to replace the Horn, we must cut line, "shearing line" has also been owner thinks "lossy," one of the "evidence". Pan permanently frustrated smile said: "the owner thinks ' shearing line ' is prejudicial acts, in fact, this is a misunderstanding that this need we practitioners and media guide. ”
There was a brand ' so-called "non-destructive installation", which harness the direct use of dial inserted interface, no shearing line installation. But "no shearing line of non-destructive installation" this formulation, and soon was industry's counterattack, and soon there was no such reference, why? "because from car audio Hi-Hf perspective, this approach is not professional or is wrong. "Pan" permanent went on to say that because from the professional point of view, the speaker cable with speaker of the monomer full contact, if you use direct dial-type connection, there will certainly be a loose or other bad contact. Furthermore, a long time will also be oxidized. Professional practice is? the original connector cut off, connect the loudspeaker when electricity ferrochrome fully welded, with insulation blanket wrapped tight, this ensures that the loudspeaker cable and loudspeaker's stability, but also guarantee a full transfer of signals, than the original car or so-called non-destructive dial inserted is much better, it does not do harm. ”
Many owners of thinking are aiming for "remove" and "cut", not "split after you can completely restore", "cut in order to get better." "Yes, there are some car owners will think of something original car is the best. Take the door panels of audio speakers, car factory in order to save costs and time workers, loudspeaker generally does not meet the requirements, the installation Hi-Hf technology also using card-installed, in the worst driving environment, card-tend to loose. Car audio conversion may be imported die, drilling, etc. look "lossy" modification is to allow the installation of the product more stable or in a more beautiful appearance. In order to enable the sound quality is better play, adding wood pad, make noise, and to achieve Hi-Hf effect. These are not undermined by the installation. "Pan permanently said.
"In our shop, the converted audio for so many years, no owners reflect the modification of the vehicle, after the sound appears where damage which only Horn, which line short or other features missing, and so on. Only owners are not satisfied with this stage that the sound effects, audio upgrade the system or install special features, etc. "Pan permanently said," there is no loss discussed modifications, see who is going to change, if that is not or not professional people to conversion, damage may be unavoidable; if you are a professional alteration shops, lossy is unreasonable, generally let owners satisfied. Therefore, caution owners here, car audio conversion must be converted to a professional shop. ”
"Risky" converted this sentence makes sense, then back to the topic, if to technology professional, experienced, professional conversion tools by technicians, this "Lossless" can be guaranteed.
No comments:
Post a Comment